Crystal CS423x ɥåפꤷ DSP ǽͭˤˤϡ
ʲνǥ⥸塼ɤޤ

	modprobe sound
	insmod ad1848
	insmod uart401
	insmod cs4232 io=* irq=* dma=* dma2=*
  
ѥ᡼ΰ̣ϼ̤Ǥ
  
	io--Windows ɥƥ  I/O ɥ쥹 (̾ 0x534)
	irq--ΥǥХ IRQ
	dma and dma2--DMA ͥ (DMA2 Ϥ餯 0)
  
ɤˤ PnP Ǥʤ򤷤褦ȤƼԤΤޤ
⤷꤬ä Linux  PnP ǽȤޤ
  
MIDI ǽȤˤϼΤ褦ˤޤ
  
	insmod opl3 io=*
  
"io"  OPL3 󥻥  I/O ɥ쥹Ǥ 
/proc/sys/pnp ˤꡢ̾ 0x388 Ǥ


ܸ(hayashi@net.email.ne.jp) 1999.5.6
--------------------------
To configure the Crystal CS423x sound chip and activate its DSP
functions,
modules may be loaded in this order:
  
	modprobe sound
	insmod ad1848
	insmod uart401
	insmod cs4232 io=* irq=* dma=* dma2=*
  
This is the meaning of the parameters:
  
	io--I/O address of the Windows Sound System (normally 0x534)
	irq--IRQ of this device
	dma and dma2--DMA channels (DMA2 may be 0)
  
On some cards, the board attempts to do non-PnP setup, and fails.  If
you
have problems, use Linux' PnP facilities. 
  
To get MIDI facilities add
  
	insmod opl3 io=*
  
where "io" is the I/O address of the OPL3 synthesizer. This will be
shown
in /proc/sys/pnp and is normally 0x388.
